The Load Bearing CompanyStructural & steel works0161 706 3593Free survey
Guide · Updated 15 November 2026

Can you remove part of a load-bearing wall? Partial knock-throughs, nibs and wider doorways

The short answerYes. You can remove part of a load-bearing wall to make a wider doorway or a partial knock-through, keeping a length of wall or short nibs at the ends. The opening still needs a steel beam or lintel designed by a structural engineer, plus Building Regulations approval, because the wall that remains now takes the load at concentrated points.

Why keep some of the wall?

Plenty of people want the rooms connected without losing every wall. A length of wall left in place can take kitchen units, a radiator or the television, and it keeps a sense of two zones. A partial opening can also keep a chimney breast or an original feature that a full knock-through would remove.

It can be cheaper too. A doorway-sized opening in a load-bearing wall can come in under £1,500, against a typical £1,800–£4,500 for a full kitchen-diner knock-through with a single beam.

What is a nib, and why does it matter?

A nib is the short piece of wall left at the end of an opening, often only a brick or two long. Nibs are popular because they give the new beam something to sit on and leave a neat return for plastering.

The catch is that all the weight the old wall spread along its length now lands on those short pieces. The engineer checks the nib can take it, and may ask for a larger padstone or a steel post if the masonry is weak or the nib is very short.

Does a partial opening still need building regulations approval?

Yes, if the wall is load-bearing. Under regulation 3 of the Building Regulations 2010, building work includes a material alteration, and an alteration is material if it could leave the building failing a relevant requirement, which includes Part A (structure). Cutting an opening in a structural wall falls squarely into that, however small the opening.

You can apply to your council's building control or to a registered building control approver. Building control fees are typically £300–£1,000 on a domestic job, and the engineer's calculations £350–£1,000.

What decides what the opening needs?

The engineer looks at the same things as for a full removal, plus what happens at the ends:

  • The width of the opening, which sets the size of the beam or lintel
  • What sits above: floor joists, a wall on the floor above, or a roof load
  • How long the nibs are and what they are built from
  • Whether anything lands on the beam as a point load, such as a wall or post above
  • Whether either end bears into a party wall, which brings in the Party Wall Act

Can you widen an existing doorway in a load-bearing wall?

Yes, and it is one of the most common small structural jobs. The old lintel comes out, the opening is cut wider, and a new beam or lintel sized for the wider span goes in on padstones. It is propped in the same way as a full removal, just on a smaller scale, and it needs the same approval.

If you might want the full wall out later, should you do it now?

Think about it before the engineer designs anything. Taking out the rest of the wall later is a second job with its own propping, beam and approval, and the first beam may not suit the bigger opening. If a full knock-through is likely in a few years, it is usually cheaper to do it once.

Related questions

How much wall do I need to leave at each end?

There is no fixed figure. It depends on the load, the beam and the masonry, and the structural engineer sets it in the calculations. Some openings run almost full width onto padstones in short nibs; others need longer returns or steel posts.

Is a partial knock-through always cheaper than a full one?

Not always. A small opening often is, but very short nibs can need bigger padstones or posts that add cost. The fixed costs, the engineer and building control, are much the same whatever the width.

Do I need a party wall notice to make an opening?

Only if the work affects a wall you share with a neighbour, such as a beam bearing into the party wall of a semi or terrace. An opening in an internal wall that stays within your house usually does not.

Ready to take it further? See our knock-throughs & new openings service.

Read next

Want a straight answer about your project?

Send photos and rough sizes — we'll tell you honestly what it needs, what it doesn't, and what it should cost.