Load-bearing wall removal in Wilmslow
Open up kitchens, dining rooms and living spaces safely, with the wall's load carried by a correctly designed steel beam.
The Load Bearing Company installs steel beams and RSJs, removes load-bearing walls and chimney breasts, and forms knock-throughs in Wilmslow. Every job is designed by a structural engineer, propped, fitted and signed off by building control. A typical domestic wall removal with a steel beam costs £1,800–£4,500.
From 1930s semis off Altrincham Road to substantial detached homes around Fulshaw Park and Alderley Edge, Wilmslow projects are often about opening the back of the house to the garden — goalpost frames for wide sliders are a regular job here.
We cover Wilmslow, Handforth, Styal, Alderley Edge and Chorley village, and are used to working alongside the kitchen companies and architects busy in this part of Cheshire.
Wilmslow falls under Cheshire East building control; most of our Wilmslow jobs are signed off by them or by a registered approver.
Call 0161 706 3593 or email info@theloadbearingcompany.co.uk. The Load Bearing Company, Piccadilly Business Centre, Unit C Aldo Enterprise Park, Blackett Street, Manchester M12 6AE. Free survey and a fixed price for work in Wilmslow.
Open up kitchens, dining rooms and living spaces safely, with the wall's load carried by a correctly designed steel beam.
Supply and fit of steel beams, columns and goalpost frames for knock-throughs, extensions and loft conversions.
Kitchen-diners, through-lounges, new doorways and wider openings for bifold and sliding doors.
Remove chimney breasts to gain floor space, with the chimney above properly supported.
Replace cracked, rotten or sagging lintels over windows and doors, or fit new lintels to widen openings.
Shop fronts, brick facade rebuilds, wall tie replacement, subsidence repairs and repointing — with bricks and mortar matched to the original.
The smaller structural jobs that still need doing properly — joists, padstones, beam upgrades and repairs.
Loading canopies, car ports, bike sheds, smoking shelters and covered yards — galvanised frames, sheeted and guttered.
Workshops, storage units and garages — frame, cladding, roller shutters and doors, built start to finish.
Steel mezzanine floors for warehouses, units, shops and garages — designed, installed and signed off, with stairs and edge protection.
Railings, mesh and palisade fencing, security cages, gates, handrails and bollards — galvanised or powder-coated, properly fixed.
Controlled demolition and strip-out — internal walls, facades, canopies and outbuildings, safely supported and cleared.
Fit-only or supply-and-fit steel for builders, developers, kitchen fitters and loft conversion companies.
Brickwork repairs, tuckpointing, repointing and masonry work — matched to the original.
Plasterboard, drylining, plaster finishes and damproofing — interior finishing done properly.
First and second fix joinery, doors, windows, frames and carpentry — finished properly.
Real jobs, with the photos, so you can see the standard before you book a survey in Wilmslow.

The entire back wall of a semi carried on one steel beam, opening the house into a new rear extension.

Several steel beams through one renovation, including twin steels tucked beneath an ornate period ceiling — cornice untouched.

Chimney breast removed to reclaim floor space, with the remaining stack above picked up on a new steel beam.
Our published price bands apply across the North West, Wilmslow included. Every job gets a fixed price after a free survey.
The full breakdown is in our wall removal cost guide and steel beam installation cost guide.
Most domestic jobs in Wilmslow cost £1,800–£4,500 for the steel beam and installation, plus £350–£1,000 for the structural engineer's calculations and £300–£1,000 for building control. A full-width rear opening with a goalpost frame is usually £5,000–£10,000.
The installation itself typically takes one to two days for a single beam. From survey to sign-off, including calculations and building control, it usually runs three to six weeks, longer if party wall notice is needed.
Yes. Removing a load-bearing wall or chimney breast needs Building Regulations approval and an engineer's calculations. Wilmslow falls under Cheshire East building control; most of our Wilmslow jobs are signed off by them or by a registered approver.
Yes. We remove chimney breasts across Wilmslow with the stack above properly supported. A single ground-floor chimney breast typically takes two to four days including the support and making good.
We also cover Knutsford, Macclesfield, Stockport, Altrincham.
Send a couple of photos and rough sizes — we'll come back the same working day with honest advice and a budget price.