Steel beams for open-plan living in a Warrington new-build: is the wall load-bearing, and what next?
Aren't internal walls in new houses just partitions?
Some are. Modern roofs are mostly built from trussed rafters that span from one outside wall to the other, so upstairs walls often carry nothing from the roof. That is where the idea comes from.
Downstairs is different. The first-floor joists have to land somewhere, and on many house types they bear on a blockwork wall in the middle of the ground floor. That wall is often the one between the kitchen and the lounge.
How can I tell what my wall does?
Tapping is not enough. A solid-sounding wall can be a partition, and a hollow one can be a load-bearing timber stud wall in a timber-frame house. Useful clues come from the paperwork:
- The developer's plans or the house type drawings, if you were given them on completion
- The building regulations record for your house. Warrington Borough Council lets you search building regulation applications and work done on a property
- Which way the floorboards or the joists run, seen from the loft hatch to the upstairs floor or under a lifted board
- A structural engineer's visit, which settles it
Do neighbours on the same estate tell me anything?
Less than you would think. The same house type can be built with different floor designs on different phases, or in a mirrored or extended version. A neighbour's knock-through is a good sign the layout works, but your own wall still needs checking and its own calculations.
What changes when the beam goes in a modern house?
The blockwork is often lightweight, so the engineer specifies padstones under each end of the beam to spread the load. Some house types have engineered timber joists, which need the right hangers and bearing details.
Services are the other difference. Modern walls often hide cables, data and heating pipes, and some houses have underfloor heating in a screed. These are traced and rerouted before the wall comes out.
Should I tell my new-home warranty provider?
Yes, if the house is still within its warranty. Structural alterations can affect what the policy covers, and the terms vary by provider. Check before work starts and keep the engineer's calculations and the completion certificate with your house papers.
If the house is leasehold, or the estate has restrictive covenants, check the lease or title for any need to get consent too.
How does Warrington building control handle it?
Warrington Borough Council's building control team deals with open-plan alterations and says it usually processes applications in 10 working days. It offers a same-day inspection if you call before 10am. You can use a registered building control approver instead.
The council also offers help where a private building control company has stopped trading, which is worth knowing if your house was built under an approver that has since closed.
What does it cost?
A single internal opening sits within our published £1,800–£4,500 range for the steel and installation, plus £350–£1,000 for the engineer and £300–£1,000 for building control. Opening the back of the house to the garden for wide doors usually needs a goalpost frame, typically £5,000–£10,000.
Related questions
My house is timber frame. Can a wall still come out?
Often, yes. In a timber-frame house some internal stud walls are load-bearing, and the beam design picks up the frame rather than masonry. The engineer needs to see the construction before designing anything.
Do I need planning permission for an open-plan layout?
Not for internal walls in an ordinary house. Some estates have planning conditions or covenants about the outside of the house, so check before any changes to the rear wall or windows.
Can the beam be hidden in the ceiling?
Sometimes. Depending on the floor design, the steel can sit partly or fully within the floor depth, with the joists hung off it. That needs more work on site, and the engineer will say whether it is possible.
Ready to take it further? See our steel beam & rsj installation service.