The Load Bearing CompanyStructural & steel works0161 706 3593Free survey
Merseyside

Steel beam installation & wall removal in Wirral

The Load Bearing Company installs steel beams and RSJs, removes load-bearing walls and chimney breasts, and forms knock-throughs in Wirral. Every job is designed by a structural engineer, propped, fitted and signed off by building control. A typical domestic wall removal with a steel beam costs £1,800–£4,500.

The Wirral mixes Victorian villas in Oxton and Rock Ferry, inter-war semis across Wallasey and Bebington, and large detached homes in Heswall, Caldy and West Kirby — the bigger houses often wanting wide rear openings onto the garden.

We cover the whole peninsula, from Birkenhead terraces to the coastal properties on the west side.

Wirral falls under Wirral Council building control, or a registered approver.

Call 0161 706 3593 or email info@theloadbearingcompany.co.uk. The Load Bearing Company, Piccadilly Business Centre, Unit C Aldo Enterprise Park, Blackett Street, Manchester M12 6AE. Free survey and a fixed price for work in Wirral.

What we do in Wirral

Steel shelters & canopies

Loading canopies, car ports, bike sheds, smoking shelters and covered yards — galvanised frames, sheeted and guttered.

Metal railings & fencing

Railings, mesh and palisade fencing, security cages, gates, handrails and bollards — galvanised or powder-coated, properly fixed.

Demolition & strip-out

Controlled demolition and strip-out — internal walls, facades, canopies and outbuildings, safely supported and cleared.

Recent work

Real jobs, with the photos, so you can see the standard before you book a survey in Wirral.

All projects →

Steel beam and wall removal costs in Wirral

Our published price bands apply across the North West, Wirral included. Every job gets a fixed price after a free survey.

  • Load-bearing wall removal with a steel beam: £1,800–£4,500 for the steel and installation
  • Structural engineer's calculations: £350–£1,000 for a domestic beam
  • Building control: £300–£1,000, depending on the council or approver
  • Full-width rear opening with a goalpost frame: usually £5,000–£10,000

The full breakdown is in our wall removal cost guide and steel beam installation cost guide.

Questions people in Wirral ask

How much does it cost to remove a load-bearing wall in Wirral?

Most domestic jobs in Wirral cost £1,800–£4,500 for the steel beam and installation, plus £350–£1,000 for the structural engineer's calculations and £300–£1,000 for building control. A full-width rear opening with a goalpost frame is usually £5,000–£10,000.

How long does a steel beam installation take in Wirral?

The installation itself typically takes one to two days for a single beam. From survey to sign-off, including calculations and building control, it usually runs three to six weeks, longer if party wall notice is needed.

Do I need building regulations approval to remove a wall in Wirral?

Yes. Removing a load-bearing wall or chimney breast needs Building Regulations approval and an engineer's calculations. Wirral falls under Wirral Council building control, or a registered approver.

Do you remove chimney breasts in Wirral?

Yes. We remove chimney breasts across Wirral with the stack above properly supported. A single ground-floor chimney breast typically takes two to four days including the support and making good.

Nearby

We also cover Liverpool, Chester, Ellesmere Port, St Helens.

Planning structural work in Wirral?

Send a couple of photos and rough sizes — we'll come back the same working day with honest advice and a budget price.