The Load Bearing CompanyStructural & steel works0161 706 3593Free survey
Guide · Updated 17 November 2026

Buying a house where a wall has been knocked through: what to check before you exchange

The short answerAsk the seller for the building regulations completion certificate and the engineer's calculations for the beam. If they can't provide them, check the council's building control records. If there is still nothing, get a structural engineer to look at the beam and its bearings before you exchange, then agree regularisation or a price reduction.

Why does a knock-through come up when you buy?

Because a load-bearing wall removal is building work that should have been approved. Your solicitor will ask for proof, usually a completion certificate from the council or a final certificate from a registered building control approver.

Without it, nobody can show that the beam was designed and inspected. That is a question about safety as well as paperwork.

What paperwork should the seller have?

Ideally all of these:

  • The completion certificate or final certificate for the work
  • The structural engineer's calculations and drawing for the beam
  • Any party wall award or neighbour's written consent, if the beam bears on a shared wall
  • Any guarantee or invoices from the contractor who did the work

How can I check the council's records?

Most councils let you search building control applications online. Trafford, Stockport, Warrington, Salford and Cheshire West and Chester all have searches on their websites, and Liverpool City Council will supply a copy completion certificate if it inspected the work.

Salford City Council notes that completion certificates are only issued once a final inspection has been requested, so an application on file without a certificate can mean the final visit never happened.

What should I look at on the viewing?

You can't see inside the boxing, but some signs are worth a second look:

  • Cracks running up from the ends of the beam, or diagonally in the walls either side
  • A ceiling line that dips across the opening
  • Doors upstairs, above the opening, that stick or have been planed
  • Cracks in the room above along the line of the old wall
  • A very slim bulkhead over a wide opening, which may hide a timber or undersized lintel

What if there is no certificate?

Then there are two routes. Regularisation is an application to the council for work done without approval. GOV.UK says it is available only from a local authority, only for work carried out after 11 November 1985, and you may have to make alterations before a regularisation certificate is issued.

The other route is indemnity insurance, which covers the cost of council enforcement over missing approval. It does nothing for the beam itself, and it is normally void if anyone has already contacted the council about the work.

Who should check the beam?

A structural engineer. Your surveyor may flag the opening, but the engineer can check what the beam is, what it sits on and whether it is adequate. That can mean opening a small area of plaster at one bearing. Agree that with the seller first.

If the support is right, regularisation is usually straightforward. If not, you know what the fix is before you commit.

What does putting it right cost?

It depends what the engineer finds. Our published figures are £350–£1,000 for an engineer's calculations on a domestic beam and £300–£1,000 for building control. If the steel has to be replaced, a typical opening is £1,800–£4,500 including the beam and installation. Regularisation fees are set by the council.

Related questions

The wall came out before 1985. What then?

Regularisation only covers work carried out after 11 November 1985. For older work, an engineer's report on the beam is the best evidence you can get, and your solicitor will advise on the rest.

Should the seller or the buyer pay to sort it out?

It is a negotiation. Some sellers regularise before completion, some agree a price reduction and leave it to the buyer. Get the engineer's view first so both sides know what the work involves.

Will my mortgage lender care?

Some lenders want structural work without approval resolved before the mortgage completes. Tell your lender and your solicitor as soon as it comes up.

Ready to take it further? See our load-bearing wall removal service.

Read next

Want a straight answer about your project?

Send photos and rough sizes — we'll tell you honestly what it needs, what it doesn't, and what it should cost.