The Load Bearing CompanyStructural & steel works0161 706 3593Free survey
Guide · Updated 16 November 2026

Removing a chimney breast in a Manchester terrace: the shared stack, your neighbour and the council

The short answerYes, you can remove a chimney breast in a Manchester terrace, but the stack is usually shared with next door. That means a party wall notice at least two months ahead, a steel beam or full-height removal designed by an engineer, keeping your neighbour's flue intact, and building regulations approval from Manchester City Council or a registered approver.

Why is a terrace chimney different from one in a detached house?

In most Victorian and Edwardian terraces in Levenshulme, Longsight, Rusholme, Gorton and Moston, the chimney breasts are built against the party wall, back to back with the ones next door. The two breasts share one stack above the roof.

So your breast is not just yours. Taking it out cuts into a wall you share, and whatever is left above has to be carried without disturbing next door's chimney.

Does the Party Wall Act apply to a chimney breast?

Yes. Section 2(2)(g) of the Party Wall etc. Act 1996 gives you the right to cut away a projecting chimney breast from a party wall, and section 3 says you must serve a party structure notice first. GOV.UK lists removing chimneys from a party wall as work you must tell your neighbour about.

Notice goes in at least two months before work starts. Your neighbour has 14 days to consent in writing. No reply counts as a dispute, and surveyors are then appointed to agree an award.

Ground floor only, or the whole chimney?

There are three common versions of the job, and they are very different in scale:

  • Ground-floor breast only: the breast above stays, so the bedroom breast and the stack are carried on a steel beam, or on brackets where the engineer and building control accept them
  • Ground and first-floor breasts: the support moves up into the loft, carrying the remaining chimney and the stack
  • The whole chimney through the roof: nothing is left to carry, but the roof is altered and next door's side of a shared stack has to stay sound, so this needs the neighbour on board

What happens to next door's flue?

It must keep working. Your neighbour may still have a gas fire, a stove or an open fire using their side of the stack. The work is planned so their flue is not broken into or blocked, and the shared brickwork between the flues stays intact.

Your own flue is capped and vented once it is no longer used, so it does not let in rain or cause damp.

How does Manchester City Council handle the approval?

Chimney breast removal is structural work, so it needs building regulations approval from Manchester City Council or a registered building control approver. The council accepts a full plans application or a building notice for this kind of job.

The council says a building notice is valid for three years and work can begin two days after you submit it, but it may still ask for plans and calculations later. You must tell the council at least two working days before work starts.

What does the inspector look at?

Manchester's building control inspections check work that would otherwise be covered up, such as the steel bearing into the wall and the padstones, against the regulations. The council is clear that these are not quality control or warranty inspections.

That is a reason to choose a contractor who works from the engineer's design and books inspections before closing anything up.

What does it cost?

We price chimneys after seeing them, because the amount of masonry left above varies. The parts we publish are the engineer's design at typically £350–£1,000, a single domestic steel at £200–£500, and building control at £300–£1,000. If your neighbour appoints a surveyor, allow £700–£1,000+ per surveyor.

Related questions

Can I remove the chimney breast if next door still uses their fireplace?

Usually, yes. Their flue stays in place and keeps working, and your side of the stack is supported or removed in a way that leaves theirs sound. It needs planning, and it needs the neighbour to know in advance.

Is it cheaper to remove just the downstairs breast?

The work in the room is less, but the support for what stays above still has to be designed and installed. Taking out more of the chimney moves the support higher rather than removing the need for it.

My terrace already has a breast missing. What should I do?

Find out what is holding up the chimney above, and check whether the work was ever approved. Our guide to chimney breasts removed without building regs covers the checks and how to put it right.

Ready to take it further? See our chimney breast removal service.

Read next

Want a straight answer about your project?

Send photos and rough sizes — we'll tell you honestly what it needs, what it doesn't, and what it should cost.